We can be rather rough with our hands because we use them all the time. We’re pretty sure that at some point, you’ll bang your ring against a hard surface, causing a minor panic attack.
One of the questions for many diamond ring owners is: Can a real diamond fall out?
The answer is pretty simple, as it’s not uncommon for diamonds to fall out of rings. Don’t panic if it does; it happens to others more often than you think.
This problem can be fixed, especially if you find the diamond. Most jewelers can repair this type of problem. But what are the causes for diamonds to fall out? How can you avoid it?
Answers to these and many more questions are covered in this article. Without further ado, let’s dive in!
Diamonds Falling Out – Is It Common?
Accidents can happen to anyone, so a diamond falling out of a ring is relatively common. Since you use your hands for pretty much everything – and every day – there is always a risk of bumping your diamond ring into surfaces.
If you want to avoid your diamond falling out, be sure to take off your ring when doing something that requires your hands.
Additionally, the thing that determines how solid your diamond is in your ring is its setting. There are many different types of settings to choose from – and some settings are more sturdy than others.
You don’t have to worry, though. If your diamond falls out and hits the floor, it probably won’t crack.
Read Also: Can A Diamond Chip If Dropped?
Usual Causes For Diamonds Falling Out
There are several common causes to be aware of here. Once you know more about them, you can avoid these situations to the best of your ability.
If your diamond isn’t set correctly, that is usually due to the jeweler’s craftsmanship – or lack of it, thereof. And that’s why it’s vital to buy your diamond ring from reputable sources.
The second reason is a residue that builds up under the diamond and between the settings. Even though this is an unlikely cause, it’s a good reason to get your ring cleaned regularly.
The third reason is the most common – simple wear and tear. As the ring gets older, the prongs of the setting become looser. The prongs hold diamonds in place, so you can see how that might be an issue.
- What Causes Diamonds To Fall Out Of Rings?
- 4 Prong Vs. 6 Prong: Which Diamond Ring Setting Is Better?
How To Tell If The Diamond Is Loose
A great way of determining if your diamond is in good condition is checking if you’re able to move it around in the setting. We’ll warn you right away: A loose diamond means that there’s a higher risk of it falling out sooner rather than later.
To test this, you can try to move the diamond with your fingers. If the diamond moves, you might want to consider bringing it back to the shop to see if they can reinforce the stone for you.
Also, you can hold the diamond to your ear and tap on the band. If you can hear something, this indicates that the stone is already loose – or getting loose. You can do this occasionally to ensure that your ring is in good condition.
Learn More: Why Does My Diamond Keep Coming Loose?
When Not To Wear Your Diamond Ring?
You shouldn’t wear your diamond ring while you’re doing chores, like doing the dishes, for example. You could cut glass, shatter it, and hurt yourself.
It’s a matter of scratching the dishes to the point of possibly breaking them.
Putting a scratch mark on the ring’s shank is a possibility, too. You could ding up your band if you like to rage clean now and then. Admit it; we’ve all been there.
While the actual diamond should be okay, you could loosen the prongs that are holding it. It would be a disaster if your diamond fell down the drain.
Even though there is a way of getting it out, it’s not worth the risk, so take off your diamond ring before doing the dishes.
You should also avoid wearing your diamond when putting on creams or lotions. You’ll get it all over your diamond ring. You wouldn’t want to have a dirty milky diamond ring, would you?
So, take it off when you apply your cream routine. You want your diamond to shine like a star.
Furthermore, you should take off your diamond ring if you’re planning to do any rigorous activities involving using your hands.
If you feel adventurous and want to play a sport, make sure you take your ring off beforehand. If you’re going to do house chores that require you to use harsh cleaners, again, be sure to take off your diamond ring.
Also, take off your ring before going to bed or when you’re doing your morning routine. It may sound like you’ll be taking your diamond ring off half the time but think about it from another perspective:
It’s also a lot of times you get to slide your diamond ring back onto your finger and marvel at it!
We also recommend taking off your ring before shower. Even though your diamond ring wouldn’t melt, water could dull and damage the metal over time – depending on what precious metal the band is made of, that is.
So, don’t wear the ring in the shower as you could damage the metal.
Even more so, you can tangle it in your hair. That’s pretty annoying and could hurt if you get it stuck in there. Additionally, you could accidentally scratch yourself with your diamond ring.
On the other hand, you can wash your hands with your diamond ring on; It’s not made out of cotton candy, and it won’t dissolve down the drain.
You wash your hands all the time, but your hands are under the water for such a short period that it’s okay.
Watch out when drying your hands with your ring on, though. Catching a prong on a towel is terrible. You can cause a run in the towel and pull a string out – or you could get some fibers stuck in the prong and around the diamond.
Secure Settings For Diamond Rings
To keep your diamond safe, it’s worth considering some of the settings that will keep your diamond from falling out any time soon.
If you’re an active person or work with your hands, this option is perfect for you. The channel doesn’t have long prongs so that you won’t scratch it on anything, and it won’t snag your clothes.
The stones are set deep in the groove, so there is no fear of losing them. That allows you to wear your diamond ring without stress.
If you like attention, this setting is also a great choice.
It’s an eye-catcher and such a sparkler that people will notice and compliment it all the time.
One significant advantage of this kind of setting is the security it gives your diamond. The diamonds are set in a groove or channel, and due to this, it’s not easy for them to fall out.
They’re not set in prongs that are known for wearing down and can break.
Prongs also catch on clothing, which you don’t have to stress about with the channel setting. If you’re active and work with your hands, the channel setting would be perfect for you.
As gorgeous as the channel setting is, it’s also cost-effective. That is because you don’t have to worry about using uni-size gemstones in the setting.
Due to each stone not being set individually, different-sized gems can be set flush with the shank. As a result, the price is lower.
However, there are some cons to the channel setting.
The channel that protects your diamond can also collect dirt. Once that dirt enters the channel, it’s hard to remove it as it becomes trapped. You will need an ultrasonic cleaner for maintenance – but your jeweler might have it if you don’t.
Resizing is another problem of the channel setting. The ring needs to be bent to change the size, and this can loosen the stones. Tightening the gems can be challenging.
The channel setting keeps your diamonds safe, but it also hides them to some extent. Due to stones being in a groove, the light is only hitting the top. As a result, the diamond can have reduced brilliance.
The bezel setting enfolds the stone, unlike some protruding claw-like ring settings. Your diamond stays flush with the metal as it overlaps the sides of the gemstone.
Your diamond sits within the metal, and the metal envelops the diamond’s girdle and securely shows it off.
Did you know that the so-called bezel setting is one of the oldest techniques to show off a gemstone? With the latest technology, this vintage classic has turned into a ring setting with a sleek modern look.
Your ring’s gemstone is a significant part of your ring.
It needs to be protected if you have an active lifestyle. If your ring is bumped or snagged a lot, you want to avoid your diamond being set in prongs.
With the bezel, your diamond is safely encased in precious metal.
A bezel setting provides the best protection as it covers more of the diamond. Because your gemstone doesn’t protrude, it’s not as likely to be banged around a lot.
Also, the metal covers the rim of the diamond.
That is a benefit if you have a gemstone with some flaws that you don’t want to see. The bezel setting allows you to show it off, but be aware that if the stone has a defect in the middle, it will show despite this setting.
It’s good in cover-ups – but it’s not that good.
The bezel setting is easy when it comes to cleaning. This kind of setting doesn’t catch anything, unlike the prong settings that always manage to have a string or hair caught in it.
There aren’t any prongs that you need to watch out for – and taking it to the jeweler once a year for cleaning should be enough.
However, there is always a downside to every decision.
Most would agree that this kind of setting makes your diamond look smaller. It makes sense as the metal is hiding a part of the gemstone.
Another thing is the bezel setting blocking the sides of the stone, so it can’t reflect the light so well. And that reduces its sparkle.
Insuring Your Diamond Ring
Before you choose any ring insurance, it’s crucial to know what your policy covers. Each policy is different no matter what type of damage or theft occurs to the ring.
The most common things that ring insurance covers include:
- The ring getting stolen
- The replacement or the repair of the ring
- Any incident that may occur to the ring
- Any accidental damage that may occur to the ring
- Any accidental loss of the ring
It’s best to check what is being offered for the premium you’re planning to pay. Most policies that have a higher premium provide more coverage on the ring.
It’s up to you whether you’ll insure your diamond ring or not. For more expensive rings worth a lot, though, insurance can provide peace of mind if something unwanted happens to the ring.
Many people like the comfort of knowing that if something happens to their ring, the insurer will help them cover some of the costs for the ring, pay to get the repairs done, or have a replacement made if necessary.
If you’re still unsure “Can a real diamond fall out?” let us break it down for you.
As we already mentioned, accidents can happen, primarily if you use your hands for strenuous activities or handle harsh chemicals while your ring is still on.
Several things can cause your diamond to fall out of the ring. The first one is if the diamond isn’t appropriately set in the ring.
The second cause can be a residue that builds up under the diamond or in the setting. It’s unlikely that this will cause the diamond to fall out, but it’s better to keep your diamond ring clean at all times.
The third reason for a diamond to fall out is simple wear and tear.
If you plan to do some activities that involve using your hands, it’s better to take your diamond ring off to minimize the risk.
Be sure to check out some of the settings meant to protect your diamond from falling out; channel and bezel settings are perfect examples.
Lastly, if you damage your ring and the diamond falls out, it’s wise to have it insured. That will provide you with extra security for the financial losses involved in your diamond ring.